Visit www.novatractor.com for PayPal payment.
Visit www.nova-tractor.com for Credit Card and other payment method.
BCS-series - for working widths 200cm/79inch and 220cm/87inch.
Free shipping to any location within the lower 48 states (or continetal U.S.). Alaska, Hawaii & Canada Require a surcharge !
Free PTO shaft included.
Flail mower for medium and large tractors with 50hp to 90hp with CAT II. 3-point hitches front and rear mounting on tractors.Application:
The Nova Tractor BCS flail mower series is equipped with a very powerful double sided transmission made by the famous italian factory Comer, making it the perfect choice for medium and larger tractors as front or rear mower. With available working widths of up to 220cm/87inches and a hydraulic side-shift function of up to 20inches, Nova Tractor`s professional BCS mowers can be used almost anywhere. In combination with the right tractor BCS-mowers are superior to almost any vegetation and can still offer high work efficiency.
The conveniant 500mm hydraulic side-shift system saves manoeuvring in narrow corners. This function requires a double acting hydraulic control circuit on your tractor.
Nova Tractor is using 18 to 20 large high performance forged flail hammers (depending on working width) - each with a weight of 2.8LBS and made of tooling steel - that ensure a perfect mowing result on grass, undergrowth and bushes up to 1 inch diameter. The new counter knifes inside the mower helps to even increase the performance to allow mulching even high grass. The mowing height is adjusted by the heavy self cleaning roller, to prevent the mower from cutting into the ground on bumpy surface.
The large Comer free-wheel transmission lets the rotor shaft turn, once the PTO is switched off, so that its movement will not be transferred to the tractor. The mower´s front is equipped with safety flaps to prevent debris and stones being thrown out of the machine.
Front and rear mount for 540 / 1000 rpm PTO shafts: The Nova Tractor BCS flail mower uses the Nova Tractor Power Efficiency Technology. If your tractor supports 1000rpm PTO speed in addition to the standard 540rpm speed, you can use your MXZ flail mower also with the highspeed option. Just swap the two pulleys from the belt drive against each other and you can reach the same mowing performance with higher efficiency and less fuel consumption. Save fuel with the new Nova Tractor Power Efficiency technology at no extra cost and from the first meter. The double sided Comer transmission offers the possibility to use the mower on the front or rear of a tractor if it has a front PTO shaft installed. The Comer transmission can be used with 540 and 1000 rpm PTO shaft speed just by switching the upper and lower pulley of the drive belt system. The Nova Tractor BCS mowers are equipped with a double 3-point hitch, making it extremely easy to change between a front or rear mount mowing system. The rotor shaft, powered by the tractor´s PTO shaft, is turning with 2150rpm (540) or 2270rpm (1000) and cuts the material down to a minimum so that it can rot away fast. The heavy rear roller guarantees a smooth performance even on rough grounds.
Nova Tractor 4-belt drive system: The new Nova Tractor 4-belt drive system with 2/3" wide drive belts and reinforced pulleysguaratees an almost 100% power transfer rate with virtually 0% belt slippage even for these large mowers. The new Nova Tractor belt cover lets you check the correct belt tension within seconds without having to remove the belt cover. This makes service and maintenance a lot easier than before.
All BCS-mowers have easily accessible stainless steel. grease nipples for easy service and height adjustable skids and support leg for storage. The PTO shaft is part of the accessory for all BCS-flail mowers. The short and easy service plan in the user manual helps you on maintenance and service.The completely assembled ready to use machine is delivered in the massive Bowell wooden case.
Like all other Nova Tractor mowers, the BCS series has an electronically balanced knife shaft which is driven by four 2/3" wide belts. The heavy Comer free-wheel gear box runs in an oil bath, so the included transmission oil has to be filled in before you first you the machine. Underneath the massive 4 or 6mm steel housing sits the massive laser balanced knife shaft with 18 to 20 high performance hardened and galvanized hammer shaped knifes, each with a weight of 2.8LBS. The knifes are made of hardened steel and can be individually exchanged and regrinded. Powered by the PTO shaft, the rotor shaft mounted with SKF ball bearings turns with 2150 rpm (540) or 2270 rpm (1000) and cuts the material down to a minimum, so that it can rot away fast. The heavy roller in the back of the mower guarantees smooth performance even on rough grounds.
Forged flail hammer. Nova Tractor BCS is with forged and galvanized high performance hammer knives, each weight is 2.8lbs.
SKF ball bearing mounted rotor shaft. Nova Tractor BCS flail mower use SKF bearing for rotor shaft.
Replaceable counter knife. The new replaceable counter knife, integrated in the mower housing, are helping to do an even more efficient job as before.
Heavy duty roller. The mowing height is adjusted by the heavy, ball-bearing mounted self cleaning rear roller, to prevent the mower from cutting into the ground on bumpy surface.
Heavy duty front flaps. The mower's front is equipped with heavy duty safety flaps to prevent debris and stones being thrown out of the machine.
Nova Tractor Power Efficiency Technology for 540 or 1000 RPM PTO shaft speed. The BCS mower can be driven by 540 or 1000 RPM PTO speed.
20 inches hydraulic side shift system. The BCS mower supply 20 inches offset capacity .
Electronically balanced rotor. All the Nova Tractor mowers has an electronically balanced knife shaft which is driven by 3 or 4 wide belts. The heavy free-wheel gear box runs in an oil bath, so the transmission oil has to be filled up before you first use the machine.
The Nova Tractor BCS-flail mowers comply with all safety regulations and is CE tested following the 2006/42/EC machine directive.
We from Nova Tractor firmly believe that you will not find a better value for money mid size flail mower in the US market. Feel free to compare ours to the other products in the market and we are sure you will agree.
BCS flail mower has one cylinders, so it needs one loop tractor rear hydraulics.
Partially assembled machines do not contain any fuel, oil or other fluids or grease needed for operation ! BEFORE USING THE MACHINE please carefully read the English user manual.
215x110x99cm / 85x44x39inch
235x110x99cm / 93x44x39inch
|adjustable mowing height|
20 - 75mm / 0.75 - 2.95inch
|recommended grass height||
< 50 inch
|hydraulic side movement||
|3-point hitch tractor|
Cat II tractor front + rear mounted
540 / 1000 RPM
|PTO shaft length||
|work performance (approx.)||
1.5 - 4 acre/h
1.7 - 4.5 acre/h
|no. of belts / width||
4 belts / 2/3"width
|recommended tractor engine powe|
|material strength side walls||
|no. of flails (exchangeable)|
|weight of flail|
|rotor shaft RPM|
2140 (540 RPM PTO) 2270 (1000 RPM PTO)
|rotor shaft diameter / wall strength|
127mm / 8mm
|rear roller diameter / wall strength|
194mm / 6mm
transport box (LxWxH)
The BCS packing is too big,
so the lift gate for delivery is not available.
Check mower's 3 point hitch size from here.
Check mower's position on your tractor according to this size list.
BCS heavy flail mower
- Product Code: BCS
- Availability: In Stock